Chasing Repousse with Georg Schulte
Published: 02.12.2024
Design Werkstatt
- Mail:
- info
stuessi.de
- Phone:
- + 49 761 706 713
- Management:
- Felix Urs Stüssi
DEADLINE: 30/07/2025

Repoussé or repoussage is a metalworking technique in which a malleable metal is shaped by hammering from the reverse side to create a design in low relief.
Chasing or embossing is a similar technique in which the piece is hammered on the front side, sinking the metal. The two techniques are often used in conjunction.
Course instructor: Georg Schulte Master goldsmith, instructor for various Techniques at the European Trade Academy in Ahlen and head of a goldsmith studio in Münster, Germany.
Date: 14.09.2025-19.09.2025.
Teachter: G. Schulte.
Place: Freiburg.
Fee: 790 Euros.
Application & Signing up
The Price of € 790.- includes only class fee and the use of Tools. Participants have access to an extensive range of materials for the realization of jewellery. A flat rate is charged for the basic course material. Additional Materials are paid according to individual need at the end of the course. Tools are provided, some special tools can be purchased after the Workshop. Own Materials and Tools can be used as well.
The confirmation of your registration will take place immediately if a place is available. Reservations become valid with the receipt of a deposit of at least 25% of the course price within 14 days after receipt of the registration confirmation. The remaining amount must be received by the Design Werkstatt at least 1 month before the start of the course. If you withdraw up to 1 month before the start of the course, a processing fee of 25% of the course price will be retained. After that, there is no entitlement to reimbursement, unless the participant who is unable to attend provides a suitable replacement. Travel, accommodation, food and insurance are the responsibility of the participants.
If a course has to be cancelled by the Design Werkstatt, amounts already paid will be refunded in full.
Course instructor: Georg Schulte Master goldsmith, instructor for various Techniques at the European Trade Academy in Ahlen and head of a goldsmith studio in Münster, Germany.
Date: 14.09.2025-19.09.2025.
Teachter: G. Schulte.
Place: Freiburg.
Fee: 790 Euros.
Application & Signing up
The Price of € 790.- includes only class fee and the use of Tools. Participants have access to an extensive range of materials for the realization of jewellery. A flat rate is charged for the basic course material. Additional Materials are paid according to individual need at the end of the course. Tools are provided, some special tools can be purchased after the Workshop. Own Materials and Tools can be used as well.
The confirmation of your registration will take place immediately if a place is available. Reservations become valid with the receipt of a deposit of at least 25% of the course price within 14 days after receipt of the registration confirmation. The remaining amount must be received by the Design Werkstatt at least 1 month before the start of the course. If you withdraw up to 1 month before the start of the course, a processing fee of 25% of the course price will be retained. After that, there is no entitlement to reimbursement, unless the participant who is unable to attend provides a suitable replacement. Travel, accommodation, food and insurance are the responsibility of the participants.
If a course has to be cancelled by the Design Werkstatt, amounts already paid will be refunded in full.
Design Werkstatt
- Mail:
- info
stuessi.de
- Phone:
- + 49 761 706 713
- Management:
- Felix Urs Stüssi
DEADLINE: 30/07/2025
-
Introduction to Polymer Clay. A workshop with Judy McCaig
07Jun2026
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 30/05/2026 -
The Earring. A workshop with Judy McCaig
05Jun2026 - 06Jun2026
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 29/05/2026 -
Julia Maria Künnap Stone Carving Workshop 2026
26Apr2026 - 29Apr2026
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 22/04/2026 -
Pigment-Based Techniques for Coloring Metal. A Workshop with Maria Sais Fluvià
29Mar2026 - 30Mar2026
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 22/03/2026 -
Miniature Masterpieces: An Introduction to Micromosaics by Kathryn Wardill
12Jan2026 - 16Jan2026
UniSQ School of Creative Arts Toowoomba
Toowoomba City, Australia
DEADLINE: 25/11/2025 -
Jewelry-making and Metalsmithing Workshop Excursion in Chiang Mai, Thailand: Exploring Traditional Craft and Cultural He...
05Jan2026 - 15Jan2026
Craft Abroad
Chiang Mai, Thailand
DEADLINE: 15/11/2025 -
Stone and Gem Cutting in Porto with Tarja Tuupanen
24Nov2025 - 27Nov2025
JWP
Porto, Portugal
DEADLINE: 15/11/2025 -
Soldering and Volume with Nelly Van Oost
23Nov2025 - 24Nov2025
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 16/11/2025 -
Casting small objects in Bronze and Silver with Kathryn Wardill
18Nov2025 - 21Nov2025
Blue Dog Glass
Belgrave, Australia
DEADLINE: 03/11/2025 -
Electrolytic Bath Course with Gastón Rois
16Nov2025
Lalabeyou Jewellery School
Madrid, Spain
DEADLINE: 01/11/2025 -
An Exploration of Hand Fabricated Chains with Tony Finocchio
15Nov2025 - 16Nov2025
Mendocino Art Center
Mendocino, United States
DEADLINE: 14/11/2025 -
Electroforming Course for Jewelry Making with Gastón Rois
14Nov2025 - 16Nov2025
Lalabeyou Jewellery School
Madrid, Spain
DEADLINE: 31/10/2025 -
Two Sides – One Story: Workshop on Pin Mechanisms and Brooch Back Design. A Workshop by Daniela Malev
09Nov2025 - 11Nov2025
Workshops Crafts Brussels
Brussels, Belgium
DEADLINE: 02/11/2025 -
Colouring Anodised Aluminium Course with Laura Cave
01Nov2025 - 02Nov2025
K2 Academy of Contemporary Jewellery
London, United Kingdom
DEADLINE: 31/10/2025 -
Wax Carving Course with Jenny MacDonald
25Oct2025 - 08Nov2025
K2 Academy of Contemporary Jewellery
London, United Kingdom
DEADLINE: 24/10/2025